What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
10.06.2025 07:16

There are three different concepts here that are getting confused.
I post the exact comment here.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
He then asserts :
Now when you have a certain ac resistance, then a current flows in a loop.
the problem then depends on "how fast does the fuse operate?".
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
One is “what exactly is in a ‘surge protector’ ? ”
2024–10–14 [Omar Gharbi Omar Gharbi ]
What are the best self-care practices to improve mental health?
An AC voltage/ current source, and an ac inductive load.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
In schematic diagrams this is the symbol for a fuse:
Panthers' winning formula goes missing in Stanley Cup Final Game 1 loss to Oilers - NHL.com
What does a fuse do?
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
(Dc diagram shown, AC is similar).
This Demonized Carb Is Actually Great for Longevity, According to a Doctor and RD - Yahoo
For this case there are devices called Metal oxide varistors (MOV).
What is lightning?
This is where the MOV conducts again, and dissipated the energy.
Important scientific finding confirms ancient biblical events - The Brighter Side of News
but this device (an Inductor) … impedes the rapid changes in the current.
The other is “what does a “fuse” do?”
The bolt then partially travels down the line to your home.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
[image of Common-mode choke]
nine
Resilience may protect against psychopathic traits in people with childhood trauma - PsyPost
Because the load is inductive, the current lags the voltage.(by a bit).
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
At least they know the answer if they wanted it.
Denise Austin’s 5 Habits to Tackle Stubborn Belly Fat - Eat This Not That
This one hit behind the barn.
a photo is worth a thousand words.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
This device then solves the entire problem.
This is where this question deviates from being a 'generic' question, and becomes more specific.
If you were president, how would you make America "great again?"
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
Upvotes:
He then describes the function of a fuse.
SpaceX marks 500th Falcon launch with Starlink 11-22 Mission - Teslarati
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
Here is a simplified AC power diagram.
This is 'the assistant's answer'
This is the picture of an electronic coil of wire wound around a core of magnetic material.
He then describes Rainy Season and Lightning.
There are two important concepts here.
But it can get overloaded, and no longer works.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
One
So, the voltage could go up to 500 volts, and the fuse will not open up.
The third is lightning and “how it gets conducted into a home.”
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
so, what happens?
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
[old diagram got deleted by accident]
It also is a device that limits the change in current flow.
2024–10–16 [ OO OLAOYE OYEBODE ]
First Sentence:
A fuse is a non-resetable over current circuit protector.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
A circuit breaker is similar, but is resettable.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
These devices are installed between the “hot” and “neutral” and protective ground.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
These are simplified answers to the original question, and does not change anything I wrote above.
2024–10–10[John johnson John Johnson ]
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
Can the fuse protect the electronic devices from lightning instead of a surge protector.
But… the neutral is now “floating” because of the 1 ohm resistance.
what exactly is a ‘surge’ protector?
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
but I think this circuit , shows a few more pieces.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
It seems Mohan does not understand the difference between a comment and an Answer.
Barnstars:
At one ohm, the resistor has a maximum of 1 watt power.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
The MOV will conduct when the voltage exceeds 50% of line voltage.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Edit 2024–10.
eight
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.